metal film resistors, military/established reliability, mil-prf-39017 qualified, type rlr erl (military rlr) vishay dale www.vishay.com for technical questions , contact: ff1aresistors@vishay.com document number: 31023 50 revision: 30-aug-06 features ? meets requirements of mil-prf-39017 ? failure rate: verified failure rate (contact factory for current level) ? epoxy coated construction provides superior moisture protection ? traceability of materials and processing ? monthly lot acceptance testing ? very low noise (- 40 db) ? extensive stocking program at distributors and factory in 1 % and 2 % tolerances ? vishay dale has complete capability to develope specific reliability programs design ed to customer requirements 1) extended resistance range: dscc has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of mil-r-39008 rcr carbon com position resistors. vishay dale is list ed as a resource on these drawings as f ollows: these drawings can be viewed at: www.dscc.dla.m il/programs/milspec/list dwgs.asp?doctype=dsccdwg * hot solder dipped leads ** consult factory for current qpl failure rates standard electrical specifications vishay dale model mil-prf-39017 style power rating p 70 c, w resistance range 1) resistance tolerance % temperature coefficient ppm/c maximum working voltage life failure rate** erl05 rlr05 0.125 4r7 - 1m0 1, 2 100 200 m, p, r, s erl07 rlr07 0.25 1r0 - 10m 1, 2 100 250 m, p, r, s erl20 rlr20 0.50 4r3 - 3m01 1, 2 100 350 m, p, r erl32 rlr32 1.0 1r0 - 2m7 1, 2 100 500 m, p, r dscc drawing number vishay dale model power rating p 70 c w resistance range resistance tolerance % temperature coefficient ppm/c maximum working voltage 98020 erl05..36, erl05..37* 0.125 1m1 - 22m 2, 5, 10 350 200 99011 erl07..100, erl07..101* 0.25 11m - 22m 2, 5, 10 350 250 98021 erl20..36, erl20..37* 0.50 3m3 - 22m 2, 5, 10 350 350 98022 erl32..36, erl32..37* 1.0 3m0 - 22m 2, 5, 10 350 350 97004 erl62..1, erl62..2* 2.0 10r - 2m7 3m0 - 22m 1, 2, 5, 10 100 350 500 technical specifications parameter unit condition voltage coefficient, max. ppm/c 5/volt when measured between 10 % and full rated voltage dielectric strength v ac rlr05 = 300; rlr07 and rlr20 = 500; rlr32 = 1000 insulations resistance ? 10 9 minimum dry; 10 11 minimum after moisture test operating temperature range c - 65/+ 150 terminal strength lb 2lb pull test on rlr05; 5lb pull test on all other sizes solderability continuous satisfactory coverage when tested in accordance with mil-std-202, method 208 weight g rlr05 = 0.11; rlr07 = 0.35; rlr20 = 0.75; rlr32 = 1.50 global part number information tolera n ce code failure rate rlr05 f = 1 % m = 1.0 % /1000 h b14 = tin/lead, b u lk rlr07 g = 2 % p = 0.1 % /1000 h rlr20 b y a m u ltiplier r = 0.01 % /1000 h 0 0 r 1 = 1.0 s = 0.001 % /1000 h 3302 = 33 k as applica b le 1005 = 10 m new global part numbering: rlr07c3001frr36 (preferred part numbering format) rlr07c3 00 1 frr36 historical part number example: rlr07c3001fr (will continue to be accepted) rlr07 c 3001 f r r36 mil style lead material resista n ce v alue tolera n ce code failure rate packagi n g r36 = tin/lead, t/r (f u ll, except 32?s) r64 = tin/lead, t/r (f u ll; 32?s only) re6 = tin/lead, t/r (1000 pcs) blank = standard (dash nu m b er) ( u p to 3 digits) from 1-999 1 = hot solder dip (32?s) 11 = hot solder dip (20?s) 19 = hot solder dip (05?s) 23 = hot solder dip (07?s) = soldera b le/ 3 digit significant c resista n ce v alue fig u re, follo w ed mil style lead ma l a i r e t packagi n g special rlr32 w elda b le
erl (military rlr) metal film resistors, mili tary/established reliability mil-prf-39017 qualif ied, type rlr vishay dale document number: 31023 for technical questi ons, contact: ff1ares istors@vishay.com www.vishay.com revision: 30-aug-06 51 dimensions in inches [millimeters] vishay dale model abc (max.) de erl05 0.150 0.020 [3.81 0.51] 0.066 0.008 [1.68 0.21] 0.187 [4.75] 0.016 0.002 [0.41 0.05] 1.25 0.266 [31.75 6.76] erl07 0.250 0.031 - 0.046 [6.35 0.79 - 1.17] 0.090 0.008 [2.29 0.21] 0.300 [7.62] 0.025 0.002 [0.64 0.05] 1.50 0.125 [38.10 3.18] erl20 0.375 0.041 [9.53 1.04] 0.138 0.023 [3.51 0.58] 0.450 [11.43] 0.032 0.002 [0.81 0.05] 1.50 0.125 {38.10 3.18] erl32 0.562 0.031 [14.27 0.79] 0.190 0.015 [4.83 0.38] 0.625 [15.87] 0.032 + 0.002 - 0.001 [0.81 + 0.05 - 0.03] 1.50 0.125 [38.10 3.18] erl62 0.562 + 0.031 - 0.042 [14.27 + 0.79 - 1.07] 0.230 0.015 [5.84 0.38] 0.650 [16.51] 0.032 + 0.002 - 0.001 [0.81 + 0.05 - 0.03] 1.50 0.125 [38.10 3.18] b d c max. e a * 1.08 0.125 [27.43 3.18] if tape and reel material specifications element: vacuum-deposited nickel-chrome alloy encapsulation: specially formulated epoxy compound core: fire-cleaned high purity ceramic termination: standard lead material is solder-coated copper solderable and weldable per mil-std-1276, type c. applicable mil-specifications mil-prf-39017: the erl series meets the electrical, environmental and dimensional requirements of mil-prf-39017. mil-prf-226 8 4: mil-prf-39017 supercedes mil-prf-22684 on new designs. the erc series meet or exceed mil-prf-22684 requirements. documentation: qualification and failure rate verfic ation test data is maintained by vishay dale and is availabl e upon request. lot traceability and identification data is maintained by vishay dale for five years. cage code: 91637 power rating power ratings are based on the following two conditions: 1. 2.0 % maximum r in 2000 hours load life 2. + 150 c maximum operating temperature marking - per mil-prf-39017 ambient temperature in c derating % n i r e w o p d e t a r 70 0 20 40 60 80 100 120 - 65 - 50 - 25 0 25 50 75 100 125 150 175 200
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
